Bidding on this auction has not started.
Please register now so you are approved to bid when auction starts.
Menu
Menu
This auction is open!
It is now possible to bid at this auction.
This auction is closed!
It is no longer possible to bid at this auction.
You are registered for this auction
You are now approved to bid at this auction.
Your auction registration is now pending
You have successfully registered for this auction, pending approval to bid. Please check your email for further information.
Your auction registration has been declined
Please contact the auctioneer for more information.
Timed
Venue address
C/O Kite Glass Ltd
29 Avro Way
Weybridge, Surrey
KT13 0YZ
United Kingdom
Sale of Assets from Kite Glass Limited a Supplier of Toughened Laminated Glass
Auction dates
Starts:
Apr 29, 2026 05:00 PM BST
Ends from:
Jun 04, 2026 01:00 PM BST
Viewing dates
By appointment only
May 20, 2026 10:00 AM - 03:00 PM BST
Jun 02, 2026 10:00 AM - 03:00 PM BST
|
Auction currency
|
GBP |
|
Buyer's premium
|
15 % |
|
Sales tax
|
20 % |
There are 121 lots within this auction
Sorted by
Lot number
Lot number
High estimate
Low estimate
Current bid (Lowest first)
Current bid (Highest first)
End date (Soonest first)
End date (Latest first)
Sorted by
Lot number
Lot number
High estimate
Low estimate
Current bid (Lowest first)
Current bid (Highest first)
End date (Soonest first)
End date (Latest first)
Refine results
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
000
Gordon Brothers - Please read ALL the Important Information Before Signing Up to the Online Auction Sale Please Read Prior to Bidding - Important Information - Bidding Rules At the close of the timed Online Auction Sale final Bid figures will be reviewed by the Seller for its approval and any Bid shall be subject to approval and acceptance by the Company and/or the Seller. No Bid may be withdrawn under any circumstances, and the Company/Seller does not bind himself to accept the highest Bid or any other Bid placed during the Online Auction Sale. All lots are sold as seen . It is assumed that all bidders have viewed lots to their satisfaction prior to bidding. No allowance of any kind whatsoever will be made because of failure to view. We strongly advise bidders not to bid on any lot if they have not viewed to their satisfaction first. Please Read Prior to Bidding - Important Information - Reserves & Invoices Please Note: After the end of the auction and when the final auction lot has closed by Gordon Brothers Asset Ingenuity Ltd, all bids will be reviewed. Lots that did not meet their reserve may appear on your subsequent invoice which will be sent shortly after the auction has closed. Please remember when you bid - You bid to buy, which should be considered when bidding on several of the same items. Reserves prices may not have been met at the time of you placing your bid however these can be subject to change. Therefore, please refer to the 'My Account' section of the platform as this will list the items you have won, alternatively refer to the invoice that will be sent after the auction has closed to see precisely which lots you have been successful in bidding on. Please do not send your payment for lots before you have received & reviewed your invoice. Please check your Junk Email Folder as sometimes our invoices can get filtered through to Junk mail even if the winners notification is successfully delivered. Please email - EMEA-Auctions@gordonbrothers.com if you have any queries or you believe that your invoice is incorrect or has not been received. Please Read Prior to Bidding - Important Information - Buyer Obligations Please Note: Bidders who fail to complete their transaction for their invoice by the payment deadline stated within the Important Information and collecting their Lots in the Clearance period will be reported to the platform hosts and will be subject to platform-wide suspension or a ban of all current and future accounts created unless outstanding invoices are settled and lots removed from site. Non-payment does not automatically lead to your invoice being forfeited as all bids made are legally binding as per our standard terms and conditions of sale to which all bidders agree to pre-auction sign up. Legal action to recover amounts per outstanding invoices will be taken. The platform hosts make audit trails available, and we are able to see all bidder activity across each lot. Do not bid unless you aim to complete your transaction(s) in the auction-specified time frame. Should you have any questions about the above-mentioned information then please contact Gordon Brothers Asset Ingenuity Ltd EMEA-Auctions@gordonbrothers.com
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Hegla Optimax 3326 F Plus glass cutting machine Serial Number: 6806 Year of Manufacture: 2018 With: Hegla Type LKT 4243 float table Serial Number: 34933 Year of Manufacture: 2018 PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Bottero 353 BCS-J CNC glass cutting machine Serial Number: GG6T1B-21136 Year of Manufacture: 2015 Approximate Table Size: 8 x 4m PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Intermac Master 43V CNC vertical glass machining centre Serial Number: 35757 Year of Manufacture: 2009 PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Triulzi vertical glass washer Model: VTISSFA35.2200.4./22 Serial Number: DSDC10049TL Year of Manufacture: 2016 PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Forvet Francesca FC 16M 2600 Numerically Controlled (NC) glass working center with infeed and outfeed conveyors Serial Number: 573/13 PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Triulzi Horizontal Glass Washer with infeed table Model: SYA.2200.4.1+2.4 Serial No. DD0T30004 Year of Manufacture: 2018 Indicated Implant Work Hours: 27549:07:09 PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Adelio Lattuda vertical glass washer Type: OT 1600-300-49 Serial Number: 287 Year of Manufacture: 2020 Indicated working hours: 4660.3 PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
EFCO glass tempering line with control panels and ventilated room Furnace Type: 2100 X 4500 Glass Temp Reference Number: 47108 Year of Manufacture: 1996 PLEASE NOTE: This lot is a multi-component industrial tempering line including the furnace, quench section, and ventilated room. Removal is a major undertaking estimated to require 7–10 working days. It is the sole responsibility of the successful buyer to arrange for disconnection from the high-voltage power source and gas supply by fully qualified, insured engineers (e.g., NICEIC and Gas Safe registered). SITE DAMAGE & PERFORMANCE DEPOSIT: A refundable deposit of £5,000 must be paid to the Auctioneer prior to any dismantling works. This deposit serves as security against building damage, improper utility capping, or failure to clear the site. It will be returned in full only once the lot—including all internal ceramic rollers, acoustic enclosure panels, and associated debris—is removed and the site is inspected to the satisfaction of the Auctioneer. BUILDING REINSTATEMENT: The purchaser is strictly responsible for reinstating the building structure to its original condition at their own expense (including any alterations made to doors, cladding, or flooring) to the satisfaction of the Auctioneer and Landlord. REMOVAL REQUIREMENTS: A comprehensive site-specific Method Statement and Risk Assessment (RAMS) and proof of £5m Public Liability Insurance are mandatory. STRICT DEADLINE: Total removal must be completed within the 14-day clearance window. Viewing is essential to understand the massive logistical requirements and the scale of the utility disconnections involved
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Italmatic Autoclave with loading trolleys and external water cooling tower Model: AIV 2600 319 2600x5500 Serial Number: 319 Year of Manufacture: 2005 Including (2) loading trolleys With large external water cooling tower and Owamat 14 oil/water seperator PLEASE NOTE: A significant amount of work will be required for the removal of this lot. It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from all power, water, and gas supplies by qualified, insured personnel. SITE DAMAGE & PERFORMANCE DEPOSIT: A refundable deposit of £5,000 must be paid to the Auctioneer prior to any dismantling or removal works commencing. This deposit will be held as security against any damage to the building or failure to complete the removal/reinstatement by the deadline. It will be returned in full only once the site is cleared and inspected to the satisfaction of the Auctioneer. LEGAL COMPLIANCE (PSSR 2000): This lot is sold as a used pressure system. Under the Pressure Systems Safety Regulations 2000, the purchaser is legally responsible for establishing a new Written Scheme of Examination (WSE) and ensuring a thorough inspection by a Competent Person prior to re-commissioning. BUILDING REINSTATEMENT: Should the removal of this lot require any alteration to the building structure (including but not limited to the removal of doors, walls, or cladding), the purchaser is responsible for reinstating the building to its original condition to the satisfaction of the Auctioneer and Landlord. REMOVAL REQUIREMENTS: A site-specific Method Statement and Risk Assessment (RAMS) and proof of £5m Public Liability Insurance are mandatory. Strict 14-day removal deadline applies. Viewing is highly recommended.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
012A
Bovone feed conveyor Type: Stratif.LLM.2245 Serial Number: 04059422 04 PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Auto vacuum bridge glass panel lifter with overhead gantry and sliding rails PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Bovone glass laminating line to include: Bovone glass heat press/oven Model: Stratif.LLM.2245 Serial No. 04059422 04 Bovone infeed and outfeed conveyors Laminate material dispensing roller system with (4) storage racks PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Schiatti Angelo edge grinder Type: FPS.20.RS Serial Number: 195 Year of Manufacture: 2015 Dimensions: Roller frame height: 3m Overall machine height: 3.9m Overall machine width: 7.7m approx. PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Adelio Lattuada edge grinder Type: TLR11AVODD Serial Number: 1399 Year of Manufacture: 2018 Dimensions: Roller frame height: 2.95m Overall machine height: 3.8m Overall machine width: 9.6m approx. PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Fratelli Pezza Mistral 200 vertical glass sheet sand blasting machine Serial Number: 710100 Year of Manufacture: 2000 Dimensions: Overall machine height: 3.15m Overall machine width: 7.15m PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
EFCO Gas heat soak furnace with loading trolley Dimensions: Door opening: 1.7m (W) x 1.8m (H) Depth of oven: 3.1m Overall external dimensions: 2.4m (W) x 2.5m (H) x 4.5m (D) approx. (plus external fans etc.) Please Note: A large amount of work will be required for the removal of this lot. It is the responsibility of the successful buyer to arrange for the machine to be disconnected from both the power source and gas supply by authorised personnel. A Method Statement and Risk Assessment will be required prior to the removal. Viewing prior to bidding is highly recommended to understand the position of this lot and requirements for removal.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
EFCO Electric heat soak furnace with loading trolley Eurotherm Chessell 6100E controller Dimensions: Door opening: 2m (W) x 2.32m (H) Depth of oven: 4.6m Overall external dimensions: 2.7m (W) x 3.5m (H) x 4.8m (d) approx. (plus external fans etc.) Please Note: A large amount of work will be required for the removal of this lot. It is the responsibility of the successful buyer to arrange for the machine to be disconnected from both the power source and gas supply by authorised personnel. A Method Statement and Risk Assessment will be required prior to the removal. Viewing prior to bidding is highly recommended to understand the position of this lot and requirements for removal.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Pixmax 1350mm Vinyl Cutter Plotter Machine Model: PME1350 Serial No. 24060615
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Kippax Print Tech Paraprint screen printing machine Model: Paraprint 2760-PP Serial Number: 2901PP Year of Manufacture: 2015 Overall dimensions including arms: 4.5m (L) x 3.2m (W) x 1.7m (H) Table dimensions: 4m (L) x 2.1m (W) Machine is on a 3-phase plug Please Note: The shutter door that will need to be used for removal is approx. 2.9m wide, it will be necessary to remove some components of the machine before the machine can be uplifted. PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Sanco Drying Solutions CB190 drying tunnel Serial Number: CB190-120-3-2C-120-G-0246 Year of Manufacture: 2017 Please Note: Extraction ducting not included Total hours: 1,100 Overall dimensions: 7.6m (L) x 2.7m (W) Conveyor approx. 1.9m (w) with outfeed roller table Dimensions approx.: 2.5m (L) x 1.63m (W) x 89cm (H) No extraction pipework included Please Note: The shutter door that will need to be used for removal is approx. 2.9m wide. Other lots will need to be removed prior to this lot and therefore collection dates may be limited. PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
(1995) Kippax edger sander Serial No. SB170 Approx overall dimensions: 2.4m (w) x 1.44m (H)
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Mobile roller table Dimensions approx. 2.4m (L) x 1.55m (W) x 91cm (H)
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
c.150 Aluminium screen printing frames in various sizes with (3) storage racks Sizes range from 60cm x 60cm to 3.76m x 2.01m
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Angelantoni STU90 climatic chamber with Hanna test meters to include: (2008) Angelatoni STU90 chamber Serial No. 51481 Hanna HI-9812-5 pH portable temperature meter Hanna HI98303 conductivity meter Hanna HI98107 pH meter
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Glass four point bend test rig
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Glass pressure gauge test jig
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Manual winch operated glass drop test rig
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Manual glass swing ball test rig
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Manual glass impact test rig
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Hydraulic glass test rig
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
9m glass drop ball test rig with drop ball and electromagnet PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Bavelloni SB10 edge grinder with tooling in storage cabinet Year of Manufacture: 2019 PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
(2015) Adelio Lattuada Delta M3 corner grinding machine with folding roller table Serial No. 317 Roller table dimensions: 2m (L) x 1.02m (W) PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Powergrind Multi-Rad edge grinder Serial Number: 2094 Year of Manufacture: 1988 Table measures approx. 2.17m x 1.3m PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Schiatti Angelo semi-auto glass drill Machine Type: FPD60 Serial Number: 319 Date of Manufacture: 04/2016 PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
STA U-15 semi-automatic centrifugal separator Serial Number: MC-18-0049 Year of Manufacture: 2018 PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Ingersoll Rand R55i rotary screw package air compressor Serial Number: UCV1005188 Year of Manufacture: 2014 PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Ceccato CSC60 13 Bar packaged air compressor Year of manufacture unknown. Assumed to be c.2017 with first service date being 2018 with SICC 1000/7435 16 bar 1000L receiver PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Ingersoll Rand RS30i packaged air compressor with receiver Serial Number: UCV1022579 Year of Manufacture: 2018 Power on hours: 62629 Running hours: 19682 CSC SRL 12 bar 1000L air receiver Please Note: Due to the location of this lot, other lots will need to be removed prior to this one and clearance dates therefore may be restricted. It should also be noted that this lot is for the compressor and receiver only, no pipework is included. PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Ingersoll Rand RSe37n packaged air compressor with receiver Serial Number: A34905546 Year of Manufacture: 2021 Hours: 32939 CSC SRL 12 bar 1000L air receiver Please Note: This lot will need to be removed at the earliest possibility as it is restricting access to other lots. It should also be noted that this lot is for the compressor and receiver only, no pipework is included. PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Ingersoll Rand D600IN-A compressed air dryer Year of Manufacture: 2015 Please Note: Due to the location of this lot, other lots will need to be removed prior to this one and clearance dates therefore may be restricted. It should also be noted that this lot is for the air dryer only, no pipework is included. PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
A.J. Metal Products air receiver Serial Number: 30499 Year of Manufacture: 2008 Please Note: Due to the location of this lot, other lots will need to be removed prior to this one and clearance dates therefore may be restricted. It should also be noted that this lot is for the receiver only, no pipework is included. PLEASE NOTE: This lot is sold as a used pressure vessel. It is the sole responsibility of the successful buyer to arrange for disconnection and removal by qualified personnel. LEGAL COMPLIANCE (PSSR 2000): If this air receiver exceeds 250 bar-litres (Pressure x Volume), it is subject to the Pressure Systems Safety Regulations 2000. The purchaser is legally responsible for establishing a new Written Scheme of Examination (WSE) and ensuring a thorough inspection by a Competent Person prior to re-use. The Seller and Auctioneer provide no warranty regarding the current certification of the vessel. REMOVAL REQUIREMENTS: A site-specific Method Statement and Risk Assessment (RAMS) is required. The system must be fully depressurized and drained of all moisture before removal. Strict 14-day removal deadline applies.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
(2) 11 bar air receivers to include: Cool Technology air receiver Part Number: VN6A/11EN Serial Number: C1/1/2314 Vessel Technology air receiver Part Number: 132500500EN Serial Number: C112568 Please Note: Due to the location of this lot, other lots will need to be removed prior to this one and clearance dates therefore may be restricted. It should also be noted that this lot is for the receivers only, no pipework is included. PLEASE NOTE: This lot is sold as a used pressure vessel. It is the sole responsibility of the successful buyer to arrange for disconnection and removal by qualified personnel. LEGAL COMPLIANCE (PSSR 2000): If this air receiver exceeds 250 bar-litres (Pressure x Volume), it is subject to the Pressure Systems Safety Regulations 2000. The purchaser is legally responsible for establishing a new Written Scheme of Examination (WSE) and ensuring a thorough inspection by a Competent Person prior to re-use. The Seller and Auctioneer provide no warranty regarding the current certification of the vessel. REMOVAL REQUIREMENTS: A site-specific Method Statement and Risk Assessment (RAMS) is required. The system must be fully depressurized and drained of all moisture before removal. Strict 14-day removal deadline applies.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Munters MLT1400 Plus desiccant dehumidifier with Galletti air conditioning unit Munters Model: MLT1400 Plus G211875-1 Fabrication Number: 1928 012182 744104 Year of Manufacture: 2019 Galletti MTE 005 CM AA Serial No. 19700826 Date of manufacture: 16/07/2019 It should also be noted that this lot is for the dehumidifier and air conditioning unit only, no pipework is included. PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Munters ML17 E stand-alone desiccant dehumidifier Serial Number: 1723 1089 728661 Year of Manufacture: 2017 It should be noted that this lot is for the dehumidifier unit only, no pipework is included. Please Note: This lot is located on top of a central mezzanine floor in the centre of the building. PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
(2005) Stulz CCU 201A air conditioning unit with CompTrol 1002 controller It should be noted that this lot is for the air conditioning unit only, no pipework is included. PLEASE NOTE: It is the sole responsibility of the successful buyer to arrange for the machine to be disconnected from the power and water/air sources by qualified and insured personnel. REMOVAL & SAFETY: A site-specific Method Statement and Risk Assessment (RAMS) and proof of Public Liability Insurance are mandatory prior to any works. Buyers must ensure that all utility points are left in a safe, capped-off condition. STRICT 14-DAY DEADLINE: All assets must be removed within the 14-day clearance window. Any damage caused to the building during removal is the responsibility of the buyer and must be made good to the satisfaction of the Auctioneer. Failure to clear the asset by the deadline may result in the forfeiture of the lot and any monies paid. Viewing is recommended to assess the removal requirements.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Wadkin SR 1148 industrial table saw Please Note: This machine appears to be in an operational condition but with the lack of safety guarding, should be viewed as for spares only.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Wadkin 14AGS industrial table saw Machine No. 14AGS 691365 Please Note: This machine appears to be in an operational condition but with the lack of safety guarding, should be viewed as for spares only.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Wadkin CD950 radial arm saw Please Note: This machine appears to be in an operational condition but with the lack of safety guarding, should be viewed as for spares only.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Charnwood 2hp dust extractor Model: W691 Serial No. 24GC-006-01-11 Date: 06/2024
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Nu-star power pusher Type: 400 Model: PP10:45FF Serial Number: 2910089 Hours: 14,621
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Warren Machine Tools Warco WM 240 mini lathe with 240v coolant pump Model: WM240 Serial No. 481 Date of manufacture: 07/2022 240v power supply
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Clarke Metalworker CDP501F pillar drill Part No. 6505590 Year/Batch: 04N/3
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Abarboga Maskiner EP308 bench grinder with 3-phase power supply
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Record Power RSBG8 8" 240v bench grinder
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Lincoln Electric Powertec 300C MIG welder Serial No. P1061200088 Please Note: Gas bottle not included
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
SIP TIG welder single phase 16A with workbench and vice Workbench dimensions: 179cm (L) x 90cm (D) x 83cm (H)
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Sealey Power hacksaw Model: SM18/1
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Sealey SM355B 240v chop saw Year of manufacture: 2015
Please review and confirm your bid
Current bid:
Opening bid:
Your max bid:
Max bid:
Quantity:
Bidding ends:
Your bid is off increment
Choose one of the quick bid options below:
Your bid is below the current minimum bid
To place a bid select the minimum amount below:
Bidding has ended on this item
We are always adding new lots, use search to find similar items.
You are the current highest bidder!
To be sure to win, come back before the lot closes or increase your maximum bid.
You have been outbid!
For a chance of winning, increase your maximum bid.
You have been outbid!
Another bidder has already bid this amount. For a chance of winning, increase your maximum bid.
You have won!
Congratulations!
You are the winning bidder on this lot.
You have lost!
Unfortunately you have missed out on this lot.
Unable to place your bid
Please refresh your page to see current lot status.
We're very sorry, but we were unable to process the Buy it now.
Please contact customer services for more help.
Your bid has been declined
Your bid has been declined by the auctioneer, please contact customer services for more information.
Your bid is pending approval with the auctioneer
Please check your email account for more details.
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer
Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be successful.
Please review and confirm your bid
Current bid:
Opening bid:
Your max bid:
Max bid:
Buy it now price:
As your Max bid is at least equal to the Buy it now price, you can immediately purchase the lot.
New bid:
Quantity:
Bidding ends:
Your bid is off increment
Choose one of the quick bid options below:
Your bid is below the current minimum bid
To place a bid select the minimum amount below:
Bidding has ended on this item
We are always adding new lots, use search to find similar items.
You are the current highest bidder!
To be sure to win, come back before the lot closes or increase your maximum bid.
You have been outbid!
For a chance of winning, increase your maximum bid.
You have been outbid!
Another bidder has already bid this amount. For a chance of winning, increase your maximum bid.
You have won!
Congratulations!
You are the winning bidder on this lot.
You have lost!
Unfortunately you have missed out on this lot.
Unable to place your bid
Please refresh your page to see current lot status.
We're very sorry, but we were unable to process the Buy it now.
Please contact customer services for more help.
Your bid has been declined
Your bid has been declined by the auctioneer, please contact customer services for more information.
Your bid is pending approval with the auctioneer
Please check your email account for more details.
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer
Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be successful.